Refill Your Knights’ Armor Pen

HOW TO USE YOUR KNIGHTS’ ARMOR PEN

• This pen uses standard Parker-style ink refills.

• Twist the very end of the pen clockwise to extend the ink, and twist it counterclockwise to retract it.

REPLACING THE INK IN YOUR TWIST PEN

• Unscrew the decorated tip of the pen (below the studded ring) counterclockwise until it twists off.

• Remove the empty ink cartridge from the pen’s body and remove the spring. DO NOT discard the spring! If the spring is stuck in the tip of the pen, leave it there so it doesn’t get lost.

• Place the spring on the new ink cartridge and insert the cartridge into the pen’s tip. If the spring is stuck in the tip of the pen, align the tip of the ink cartridge with the spring and then insert it.

• Screw the decorated tip of the pen back onto the pen body until it is tight.

TROUBLESHOOTING

• If the pen won’t turn or is tight or sticky when it turns, remove the ink cartridge and spring, then replace the spring upside-down on the cartridge. This should fix most issues with the ink extending correctly.